Boom Lift License Grande Prairie - To operate an aerial boom lift, operators must be licensed through training that can be attained using both classroom sessions and practical training and by attaining a boom lift license. Instruction must be given with respect to the kind of aerial lift that would be used on the job. A License is needed for anybody who operates or works on an aerial boom lift.
Vehicle-mounted aerial devices comprise the following work vehicles: aerial ladders, extensible boom platforms, articulating boom platforms, vertical towers, and any combination of these kinds.
There are several basic safety regulations that apply to all boom lifts. Worker safety whilst within the basket is a main concern. Workers must have on a body harness and lanyard attached to the boom or basket. Never tie off to an adjacent pole, structure, or equipment. Personnel should stand on the floor of the basket, and never sit or climb on the edge of the basket. The manufacturer's load limits should be followed.
Aerial lift operators must be authorized to utilize the machinery. The operator should be familiar with all the aspects of the device and should have access to the manufacturers guidebook that must be kept within the lift. Operators are responsible for making sure that safety procedures are followed in operating the lift. A daily test of lift controls should be done. Position outriggers and set brakes (if they are utilized) on pads or a stable surface. If working on a slope, utilize wheel chocks.
Never move an aerial lift truck with an elevated boom whilst personnel are in the basket. Articulating boom and extensible boom platforms made use of as employees carriers must have plainly marked, accessible, upper controls. Except for in emergency circumstances, lower controls must not be utilized to override upper controls unless authorization has been given by the individual in the lift.
Do not wear tree or pole climbers shall while working from an aerial lift.
The insulated part of the aerial lift should not be altered.
Do inspect the booms to make certain that it is properly cradled and the outriggers are in the stowed position before moving.
When operating a boom lift next to power lines, make certain that the lines are di-electrically tested according to local rules.